GT2542

[Rocko]

I just purchased a 2006 GT2542 with a snowblower, tire chains and wheel weights.

This will be delivered to me today /forums/images/graemlins/grin.gif

I checked out some other brands, but I was only seriously considering a Cub.

I have a CC Lt 1320 http://www.rt66cybercafe.com/pics/1320.jpg
and a CC 123 http://www.rt66cybercafe.com/pics/123.jpg

The 1320 has served me well and worked HARD for around 15 years. The 123 is being restored /forums/images/graemlins/wink.gif

There wasn't any literature or brochures at the dealer or anything at the Cub website on the 06 models. I wish Cub would update their website.

Anyway, I paid $4654.00 for the GT2542 package in Connecticut. I will post my review on the new cub and link some photos soon.

 

[gamble77]

Congrats on the purchase, your dealer got his '06 models quick, I don't expect my first shipment in until next Friday. Post pic when you get it please, I am sure some of the guys on here would love to see the new 2500 series.

 

[Yetii]

Here is a picture of a 2500 series on a web page.
web page

 

[JTKub]

A 2500 series machine with a two-blade 42" deck? REALLY?!?! I didn't know that was in the works for 2006. Did they drop the 2042 and replace it with a 2542? Anyhoo- congrats on the purchase! You have to be the first 2006 owner on the board(s). Keep us posted!

G/luck
Joel

 

[Rocko]

The new GT2542 is very nice.

This is the first GT for me and the first tractor with a snowblower. I really didn't want a plow for my truck and the walkbehind snowblower isn't cutting it any more (bad back)

I tested the GT2542 by cleaning up the mess from our last storm. It was/is a wet heavy snow, but the cub handled everything very well.

As with anything new, it takes some getting used too. All the controls are totally different from my 1320.

I am over 6ft tall and weigh around 200lbs.

I found it very easy to get on and off the tractor, (even with the controls for the snowblower)

The seat is very comfortable and I had plenty of leg room.

The cables that control the shute for the snowblower run right near the exhaust. The black plastic covering on the cables melted in that area.

In the short time I ran the tractor, I have not noticed any other problems.

Here are some Pics.

http://www.rt66cybercafe.com/pics/GT2542L.jpg

http://www.rt66cybercafe.com/pics/GT2542LF.jpg

http://www.rt66cybercafe.com/pics/GT2542RFHO.jpg

http://www.rt66cybercafe.com/pics/GT2542RR.jpg

I had been looking at new cubs for about a year and wanted to get a 2500 series GT. I wasn't crazy about the 05 style hoods....I liked the look of the 1500 series but didn't want a belt drive. I'm glad I waited /forums/images/graemlins/wink.gif

 

[DmansPadge]

Great looking setup! That seat sure looks comfy as well. If you haven't already... post your pics in the "Photo" section. That way anyone can look at them when they choose.

 

[gamble77]

Isn't that seat nice?!?! I think it is better than a lot of tractor seats on the market right now! Looks like you have got a nice set up.

 

[Rocko]

Thanks for the kind words everyone /forums/images/graemlins/wink.gif

The Pics have been added to the photo section /forums/images/graemlins/grin.gif

 

[JTKub]

Very nice! Love the looks of it. Judging from the looks of the 2042-ish front tires, CC did away with the 2042 for 2006 and replaced it with a 2542. I *assume* the 2006 2544+ would have the larger/wider front tires. Looks like the exhaust is moved up nice and high now for 2006. No scorch marks in the lawn for you!

G/luck
Joel

 

[Bob55]

Nice set up!!! I'm jealous. /forums/images/graemlins/blush.gif
I want to find out if the seat for the 2006 GT2542 will fit on a 2005 GT2544. Does any one know? I know they just came out, But it sure would be nice. /forums/images/graemlins/grin.gif