I've got an old T7.When I try to start it I turn the key and it hesitates for a second or 2 before the starter kicks in.It will start every time tho. I put a new battery,cables starter solenoid and starter switch in it.Any ideas?
Hard starts
- Thread starter bundyal
- Start date
- Views: 1214
PILOON
Super Star Member
I'd suspect the ignition switch and dried inner lubricant.
Squirt some solvent/lubricant via the key slot and that might just cure it.
I've used WD40 that way with success.
Squirt some solvent/lubricant via the key slot and that might just cure it.
I've used WD40 that way with success.
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 32,343
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
Good wire connections? also power pos. neg. clean?
agjones
Platinum Member
- Joined
- May 4, 2010
- Messages
- 619
- Location
- Jessup Mill, NC
- Tractor
- Rk55HC, Kubota kx040, power-trac 425d, Bobcat L23, Yanmar 401w, bx1880, IHI 30 and Fiori D40 dumpers, Magnatrac mh5000, Dew-eze ATM72LC Slope Mower, Terramite t6 4wd, DR Power brush mower
I had something similar going on and it turned out to be corrosion in the main pos cable. Couldn't see it from the outside. The multi meter showed a ridiculous amount of resistance. Cut it open and it was a green crusty mess. Replaced it. Good to go.