Rake Harley Power Rake
- Thread starter deere275
- Start date
- Views: 1257
dubba
Gold Member
Since I can't afford it this year, here is one I've been watching on E-bay
Item number: 7599547696
http://i7.ebayimg.com/04/i/06/6f/ea/4e_1.JPG
Item number: 7599547696
http://i7.ebayimg.com/04/i/06/6f/ea/4e_1.JPG
5030tinkerer
Gold Member
Yeah, but I was concerned about the description on that one. Seems like a warning about it not lasting too much longer...
Ed
Ed
dubba
Gold Member
It depends on the selling price. It could be doing you a favor if it's only gonna last a year or so. Then you would have an excuse to buy the "updated" bar with the 3/4" nubs on it. ($1600)
EquipmentJunkie
Platinum Member
That machine on eBay is the older twin roller design. I don't know if the newer teeth would be compatible with the upper roller.
I don't know my Harleys really well, but that one looks like a pig with lipstick and a pearl necklace, in my opinion.
I don't know my Harleys really well, but that one looks like a pig with lipstick and a pearl necklace, in my opinion.
OkieG
Veteran Member
After two years checking eBay almost every day, finally, this past June a Harly came up that I bid on.
Would like to have found a place to buy a good used unit at a reasonable price right off the bat...no such luck.
A used Harly Rake is like a used Vicon Spreader...very hard to find, and even harder to find a good one at a good price.
My understanding is that both the older bar (fret) style roller and the peg style are available from GlenMac...customer preference. I don't think the peg style was necessarily intended to replace the other. I believe the two style rollers are interchangeable. The folks at GlenMac are easy to talk to if you have questions. Phone number is at their web site.
OkieG
Would like to have found a place to buy a good used unit at a reasonable price right off the bat...no such luck.
A used Harly Rake is like a used Vicon Spreader...very hard to find, and even harder to find a good one at a good price.
My understanding is that both the older bar (fret) style roller and the peg style are available from GlenMac...customer preference. I don't think the peg style was necessarily intended to replace the other. I believe the two style rollers are interchangeable. The folks at GlenMac are easy to talk to if you have questions. Phone number is at their web site.
OkieG
Investorguy
Silver Member
I found this one for for $1000 at a local new & used store. The guy said he'd seen about 6 or 7 in 25 years, so he wasn't budging on the price. None of the local rental yards seem to have them. I'm going to replacing a lawn and some other stuff this year, so I figured I'd buy it and sell it when I'm done. It's the older style, but I think that's the original paint and it's in pretty good condition.
But yeah, they're super expensive new. And super rare used. I guess people must just keep them.
But yeah, they're super expensive new. And super rare used. I guess people must just keep them.