Has anyone bypassed the interlock module on an Ariens GT ?

   / Has anyone bypassed the interlock module on an Ariens GT ? #1  

Duckdogs

New member
Joined
Jun 13, 2004
Messages
22
Location
Ohio
Tractor
Kioti CK30
If so, I'd like to hear about it. So far on mine it runs & I have lights. Working on the pto now. It's a 931014, 10hp gear drive. Maybe 1979 vintage.
 
   / Has anyone bypassed the interlock module on an Ariens GT ? #2  
it's a silly way(making an expensive transistorized, module instead of using switches or relays) for them to try to make extra money, post the wiring diagram..btw, it should be replaced by a sensible relay or switch system, since it's a safety feature, and should not be totally disabled..
 
Last edited:
   / Has anyone bypassed the interlock module on an Ariens GT ? #3  
Yep, mine fried and I had to get a job done. I agree that bypassing safety switches is not a good idea.

I simply pulled the edge connector to the interlock module off and tied the red wire
(+12V) black wire (+12V to ignition switch) and yellow wire that feeds the PTO switches together. Started and ran with both PTOs functioning.

Hope this helps!
 

Tractor & Equipment Auctions

2005 Mitsubishi Lancer ES Sedan (A51694)
2005 Mitsubishi...
2001 Freightliner E-One Pumper (A52377)
2001 Freightliner...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
40' shipping container (A52377)
40' shipping...
2015 Chevrolet Tahoe SUV (A53424)
2015 Chevrolet...
2008 CHEVROLET C7500 SERVICE TRUCK (A51406)
2008 CHEVROLET...
 
Top