Hate to have to sell it for this reason but.....

   / Hate to have to sell it for this reason but..... #1  

Badasssapper67

New member
Joined
Sep 13, 2017
Messages
22
Location
OR
Tractor
none yet
Hi all,
I bought a T400 from an estate. It was used to mow down the weeds in a hasel nut orchard. The previous owner had tractors for other duties and didnt order this unit with a front end loader.
Unless Im searching the wrong way by looking up "front end loader" there is very little option with this tractor. I've even looked up loaders for Mahindra 4010 after being informed that TYM made those and I looked at Iseki but not many options.
My first choice was a Koyker I've heard great things about the loader but the nearest dealer is 200 miles away and they havent returned my calls.
It's frustrating enough that Im thinking if I have to add 6G onto the price of the loader maybe I should just look for another unit.
If anyone has experience putting an aftermarket loader on their unit please post some pictures of the frame and supporting brackets.
Thanks.
 
   / Hate to have to sell it for this reason but..... #3  
$6000? Most aftermarket loaders for a sub-50hp tractor seem to be in the $2000-4000 range.

Aaron Z
 
   / Hate to have to sell it for this reason but..... #4  
Woods would have what you need.
 
   / Hate to have to sell it for this reason but.....
  • Thread Starter
#5  
Woods..... I'll have to check them out.
Factory loader..... any ideas about how to locate one would be greatly appreciated. I've looked for T50 loader, TX500 loader and anything that can be considered "factory" only problem is when you click to get details all the pages have been taken down.
I've looked for loaders for the Mahindra models made by TYM, for the Iseki models made by TYM.... pulling my hair out.
 
   / Hate to have to sell it for this reason but..... #6  
Woods..... I'll have to check them out.
Factory loader..... any ideas about how to locate one would be greatly appreciated. I've looked for T50 loader, TX500 loader and anything that can be considered "factory" only problem is when you click to get details all the pages have been taken down.
I've looked for loaders for the Mahindra models made by TYM, for the Iseki models made by TYM.... pulling my hair out.

Go to woodsequipment.com and click on products, and go down and click on loaders. There is a whole list of loaders listed for different size tractors. Then enter your zip code in the locate dealer box, and it will show you the nearby dealers.
 
   / Hate to have to sell it for this reason but..... #7  
TYM shows two dealers that carry tractors and another two who do service and parts for them in Oregon. I would contact the closest to you and see what a TX39H front end loader would cost. The dealers are located in Klamath Falls and Notus, ID (on the border). The parts dealers are in The Dalles and Newberg. Good luck.
 

Tractor & Equipment Auctions

2016 KENWORTH T680 TANDEM AXLE MID ROOF SLEEPER TRUCK (A52576)
2016 KENWORTH T680...
2015 Cadillac ATS Sedan (A51694)
2015 Cadillac ATS...
(1) HD 24ft Free Standing Corral Panel (A51572)
(1) HD 24ft Free...
2006 Hino 268 Truck, VIN # 5PVNJ81T962S11110 (A51572)
2006 Hino 268...
2017 Peterbilt 348 T/A Rolloff Truck (A51692)
2017 Peterbilt 348...
24'' Mini Excavator Bucket (A51573)
24'' Mini...
 
Top