Have an extra quicktatch 54" plow-Can I do a mod on it to make new attachment?

[Deere Toyz]

Hi Folks-When my blower was being repaired, I had to get a new 54" plow as I had worn through the wear edge and into the blade itself beyond the bolt holes for a new edge.(Not too smart--I know, but got a good 10 years out of it). I anticipate doing the "stall mat" mod to the new blade so it has an extended rubber wear edge. I was thinking I would weld a new steel cutting edge on the old plow and designate it solely for use as a landscaping/back blading tool. I got to thinking that maybe there is another useful implement I could make with quicktatch convenience. The options appear to be limited- perhaps a front mount thatcher. Another option would be to simply sell the old blade and let the new owner do the welding to revitalize it. What does everyone think?

Thanks, Deere Toyz.

 

[chevy]

Re: Have an extra quicktatch 54" plow-Can I do a mod on it to make new attachment?

I have 2 54" blades. One with the rubber edge & one with a steel edge. I think I would put the rubber edge on the old blade.

 

[Deere Toyz]

Re: Have an extra quicktatch 54" plow-Can I do a mod on it to make new attachment?

Two blades are better than one!!! I'm leaning in that direction, and the extra blade, if not used, could add some value down the road with any future trade in of the tracto