Having some issues again with Yt235 loader.

[cabover4us]

First time reporting this issue dealership in South Glens Falls did a measurement of the pump pressure, it was low, put it to maximum specs. For quite awhile it seemed fine, my tractor is a 2017 with 200 hours. This past summer we bought 29 wooden sections of six foot high fence on sale. Didn't have time to install, so I decided to clean an area in bay 3 standing up. Attached my chain on forks to bucket, dragged six sections onto the forks and loader would not and could not lift the wooden fence. So here we are again with lifting issues. I did buy a 3000 psi oil filled pressure guage but have no idea where the testing port is? Is it the hydraulic connector for the backhoe?

 

[Gator6x4]

First time reporting this issue dealership in South Glens Falls did a measurement of the pump pressure, it was low, put it to maximum specs. For quite awhile it seemed fine, my tractor is a 2017 with 200 hours. This past summer we bought 29 wooden sections of six foot high fence on sale. Didn't have time to install, so I decided to clean an area in bay 3 standing up. Attached my chain on forks to bucket, dragged six sections onto the forks and loader would not and could not lift the wooden fence. So here we are again with lifting issues. I did buy a 3000 psi oil filled pressure guage but have no idea where the testing port is? Is it the hydraulic connector for the backhoe?

The chain on forks put the lift point way out there in front of the tractor. The six sections of fence plus the bucket weight was more than the tractor could lift.

My suggestion would be to purchase a set of forks. The bucket alone is several hundred pound of weight to pick up and pushing the lifting point forward does not help either.