hay unroller
- Thread starter ljc
- Start date
- Views: 1999
Charolais
Platinum Member
- Joined
- Sep 26, 2004
- Messages
- 594
- Location
- south/central Va.
- Tractor
- Deutz Fahr Agrofarm 100, Stoll loader, bucket, forks & root grapple
I've built two. I use them to feed cows and are not stationary.
How big are your rolls of hay? Weight wise? The two I built are 3 point and use a hudraulic motor to spin the hay off. It could be mounted on the front end loader also. Just never had any need for that. I built these to handle up to 1,300 pound rolls. Maybe more, just never tried one larger than that. They can be built for 2,000 pound rolls also. Just use a larger everything. /forums/images/graemlins/cool.gif
I see you're new here. When you post again fill us in on what tractors and equipment you have. May be able to answer your questions a little better.
How big are your rolls of hay? Weight wise? The two I built are 3 point and use a hudraulic motor to spin the hay off. It could be mounted on the front end loader also. Just never had any need for that. I built these to handle up to 1,300 pound rolls. Maybe more, just never tried one larger than that. They can be built for 2,000 pound rolls also. Just use a larger everything. /forums/images/graemlins/cool.gif
I see you're new here. When you post again fill us in on what tractors and equipment you have. May be able to answer your questions a little better.
- Joined
- Feb 21, 2003
- Messages
- 26,980
- Location
- SE Michigan in the middle of nowhere
- Tractor
- Kubota M9000 HDCC3 M9000 HDC
you are one of many including myself
GaryBDavis
Gold Member
I'd like to see some pictures of yours. I need to build a 3pt hay unroller myself. I've seen one that was posted some time back here on TBN, but I'd like to see another. My bales are 4x5 and probably don't weigh much over 1000 pounds.