Head gland wear

[Leejohn]

You said this was the size you needed, I have a 16.75 stroke with 24' retract and 1.25 pins

The two you posted are way to long on the retract Length. The others you looked, you can change the rod end cross tube real easy but so on the base end.

 

[donniep31]

Those two look to have an extended section on the tube end. I am trying to figure out if the extended section could be cut off and work for what I need. If not I'll go with the 16" cylinders.

 

[Leejohn]

I see what you wanting to do now. Looks like it well work.