Never thought I would own a tractor, even a little one like my New Holland KZ24DA. My niece's husband uses it the most but I'm the one who broke it. That's how I found this group. Hope to use your expertise to help speed my learning curve as I work on the little guy.
Hello from Arizona
- Thread starter ejpatty
- Start date
- Views: 366
Wagtail
Super Star Member
- Joined
- Jan 15, 2013
- Messages
- 12,654
- Location
- St Helens, Tasmania, Australia
- Tractor
- JD 4105 / JD Z355E (48" deck)
G'day ejpatty and welcome to TBN from Downunder.
Enjoy the site.
(It took me a little bit to figure out that you have a TZ24DA with a 10LA loader
)
Enjoy the site.
(It took me a little bit to figure out that you have a TZ24DA with a 10LA loader
)
Thomas
Epic Contributor
- Joined
- Apr 6, 2000
- Messages
- 31,081
- Location
- Lebanon,NH.
- Tractor
- Kubota B2650HSD w/Frontloader & CC LTX1046 & Craftman T2200 lawn mower.
:welcome:to TBN...enjoy.
Thanks for the warm welcome. It took me a long time to realize that the "New Holland 10LA" on the loader referred to the loader not the tractor. What I broke was the top of the transmission enclosure where the Gannon is attached via the 3 point hydraulic lift. I was leveling the ground on the side of the house and using the gannon's rippers to break up some caliche when a ripper hit a rock. I think that's when a crack developed that finally gave way. Over $3k for the parts. My niece's husband will do repairs when parts arrive.
TBN Support
TBN Support
- Joined
- Feb 4, 2015
- Messages
- 4,561
:welcome:
Welcome to the forum! You've come to a good place for info
Welcome to the forum! You've come to a good place for info
