Hello from Texas

[tnm61]

I have a John Deere 2520 with an electrical problem in the starting circuit. Getting voltage through the ignition switch but died suddenly and won't start. Lights work but that's it. Hoping someone can point me in the right direction.

tnm61

 

[Wagtail]

G'day Mate and welcome to TBN from Downunder.

You've posted in the 'introductions' area, which may not get you the answers. Going to the "Home" page and scrolling down to a more appropriate 'forum' and re-posting your question will hopefully get you more answers/help.

Mind you, Catherine will probably 'shift' you once she spots this.

Enjoy the site.

 

[tnm61]

Thanks. I also posted the parts/repair forum. tractorbynet.com/forums/parts-repairs/409912-john-deere-2520-starting-circuit.html

Still trying to figure out how to efficiently use the site.

Regards, tnm61

 

[jbrumberg]

tnm61- Welcome to TBN!!! This site is an incredible resource. Ask away. There are no stupid ?'s; responses may vary in quality.

 

[Thomas]

:welcome: to TBN...enjoy.

 

[TBN Support]

:welcome:

Welcome to the forum!

If you can't find any help in the repair threads, posting your own should work

 

[Gem99ultra]

Hello, 'Hello from Texas' gentleman. Although I now live in mid-Georgia, I'm a native Texan of 70+ years. You'll find mostly friendly folks on here. Occasionally you'll bump into one or two that are grumpy, so ignore them.

Post your problem in the John Deere section and I'll bet you get some replies.