hello from Washington state ford 800

   / hello from Washington state ford 800 #1  

tractormap

New member
Joined
Feb 13, 2019
Messages
4
Location
b'ham wa
Tractor
ford 8n 600 800
i have a 1956 ford 800 with a 5speed transmission I have been told they make a roto gear that you can install to lower the gear ratio can any one verify this?
 
   / hello from Washington state ford 800 #2  
I've never heard of a "roto gear", and I've never heard of lowering a gear ratio other than with an auxiliary transmission which is not compatible with a five speed trans. If you are trying to run a rototiller behind your tractor, you may find the ground speed is too fast for a tiller unless your soil is very sandy. Welcome to the forum by the way, lots of good info here.
 
Last edited:
   / hello from Washington state ford 800 #3  
Hey Bellingham - welcome to TBN and the forum from over here on the east side. Does you local Ford dealer have any info on a "roto gear".
 

Tractor & Equipment Auctions

2019 Isuzu NPR-HD 24ft. Box Truck (A50323)
2019 Isuzu NPR-HD...
2015 KUBOTA 1140CRX RTV (A51406)
2015 KUBOTA...
1998 Kenworth Tandem Grain Truck (A50514)
1998 Kenworth...
2022 LEGUAN 190 SPIDER LIFT (A51242)
2022 LEGUAN 190...
2016 MACK TITAN TD713 (A51219)
2016 MACK TITAN...
4- 6 DRILL COLLARS (A50854)
4- 6 DRILL COLLARS...
 
Top