HELP NEEDED LOL (my jd 400 run out of fuel)

[12345678910]

hi all,
i have a jd400 backhoe and i was doing something and forgot to look at fuel and befor i new it i was out. now it will not start and its new to me so im just wanting to know if anyone knows how to fix this and bleed it so i can get it going again. thanks heaps

 

[Tx Jim]

Put some diesel in the tank,open bleeder screw on filter housing,pump lever on lift pump until air free fuel comes out,loosen supply line at IP,repeat pumping then try to start engine. If not start loosen inj lines at injectors and turn engine over until air free fuel comes out, tighten lines,start engine.

 

[jenkinsph]

Put some diesel in the tank,open bleeder screw on filter housing,pump lever on lift pump until air free fuel comes out,loosen supply line at IP,repeat pumping then try to start engine. If not start loosen inj lines at injectors and turn engine over until air free fuel comes out, tighten lines,start engine.

Good response from Jim, I am not sure that I could have got all of that in two sentences.:thumbsup: