Loader Help!! trying to install a 270tl loader

[starcruiser]

I'm trying to install a 270tl loader on a caseih dx55. I would greatly appreciate pictures of the hydraulic connections. Both at the diverter valve and the loader controls. THANK YOU VERY MUCH in advance. This site provides a wealth of information

 

[boggen]

i have not a clue about your tractor, so best i can do is below for ya.

http://partstore.caseih.com/us

click "find by model number" enter your model click search, and select type of tractor you have (based on S/N (serial number) and or if you have a cab or not.

it may give listings of FEL (front end loader), along with various hoses and pipes and fittings. ((possibility of needing to route around stuff and a metal pipe / fittings might work better vs a rubber hose))

a "shop / service manual" would then be your next best bet, for getting pictures/diagrams and how things go together.

 

[starcruiser]

Thank you for the reply Ryan . A dx55 (case/ih) is the same as a tc55da-except its red . I was hoping for some pics , to verify routing . thanks again

 

[RickB]

Any NH or CiH dealer can supply published installation instructions for the 270TL or its red equivalent.

 

[Ford850]

I'll try to get some pictures for you. But as Rick said, you'll be better off with the installation instructions from your dealer.
Also, here's a link going directly to the 270TL parts diagram in case that helps. Select (006) for the control valve and tubes. 270TL