HELP WITH KUBOTA B-2100 4X4

[kev@b-2100]

HI GUYS ,I HOPE SOMEBODY CAN TELL ME HOW TO REMOVE
REAR AXLE HUB OFF THE AXLE . I AM WANTING TO REPLACE REAR AXLE SEAL . I HAVE REMOVED WHEEL ,SMALL BOLT THAT GOES THROUGH
HUB AND AXLE, AND LARGE PINCH BOLT . I HAVE TRIED PENETRATING FLUID AND A LITTLE HEAT ,BUT HUB WILL NOT RELEASE FROM AXLE.
HOPE SOMEBODY WITH SOME SMART TRICKS CAN HELP ME OUT
THANKS GUYS .KEV@B-2100

 

[B2400]

Sounds like your hub has rusted to the axle. Heat and hammer time!

 

[638]

Heavy duty puller and heat.

ron

 

[kev@b-2100]

THANKS GUYS , LOOKS LIKE I WILL HAVE TO FIND A HEAVY DUTY
PULLER . I DID TRY A HOME MADE ONE , BUT THAT WASN'T
SUCCESFUL.


THANKS AGAIN
KEV@B-2100

 

[alchemysa]

Put it back together loosely and drive around a little bit.