HF Chop saw

   / HF Chop saw #2  
It's also cheaper than renting an attachment to use on a borrowed Bobcat SSL to jack hammer an old foundation to break it up. I wonder if I could use something like that to cut up an old garage floor into small enough pieces I could pile them up with my little dozer and load them into my dump truck with my FEL on the Deere. Any thoughts?
 
   / HF Chop saw #3  
You're gonna be cutting a long time with any saw like that, not to mention blades. Best way to remove an old slab is to slightly lift an edge then use a sledge hammer, you'd be surprised how easy concrete breaks once its off the ground.
 
   / HF Chop saw
  • Thread Starter
#4  
I was thinking what Syncro said, before I rented anything, I would try getting under an edge and lifting, then dropping with a rock or something underneath.

I have to cut about 8' for this project, any longer and I would be looking at a different way of doing it.
 

Tractor & Equipment Auctions

2022 K-Z Sportsmen 260BHSE 28ft T/A Travel Trailer (A51694)
2022 K-Z Sportsmen...
PAIR OF FRAME MOUNTS FOR VACUUM PUMPS (A53843)
PAIR OF FRAME...
2011 Case 3020 30ft Flex Draper Head WITH TRAILER (A53473)
2011 Case 3020...
2002 Mack CX613 Cab & Chassis (A53117)
2002 Mack CX613...
Kivel 48'' pallet fork attachment, 3500# capacity (A53421)
Kivel 48'' pallet...
2017 CATERPILLAR D11T DOZER (A52705)
2017 CATERPILLAR...
 
Top