HF Free Voltmeter
- Thread starter shawnjvl
- Start date
- Views: 2584
YannyMan
Silver Member
That's the one that just helped me MISdiagnose my front PTO failure... Was reading 0 ohms, sent it out to be rebuilt, was reading 3.2 ohms (brand new) when it got to the shop... Bearing was wiped, so it was worth it, but those things are worth what you pay with that coupon....
clemsonfor
Super Member
I have one i paid like $1.99 for. It works for volts for me just as good as the $15 one from wal mart. Although i do very little resistance readings.
California
Super Star Member
- Joined
- Jan 22, 2004
- Messages
- 14,987
- Location
- An hour north of San Francisco
- Tractor
- Yanmar YM240 Yanmar YM186D
Me too. I have several stashed all over the place. They were free like the flashlights, a while back.
My main use is to see if the tractor battery needs charging when it hasn't been started for a month, and to evaluate flashlight batteries. They work fine for this. All readings match a more expensive meter I used to have.
I don't recall I've ever used the Ohms ranges for more than determining open/short in a circuit or light bulb, however.
Shawn, thanks! Where is that ad from?
My main use is to see if the tractor battery needs charging when it hasn't been started for a month, and to evaluate flashlight batteries. They work fine for this. All readings match a more expensive meter I used to have.
I don't recall I've ever used the Ohms ranges for more than determining open/short in a circuit or light bulb, however.
Shawn, thanks! Where is that ad from?
clemsonfor
Super Member
I have seen that somewhere, i just cant remember where. I have to be on my way there already though to even think about it as it will cost me like an extra $4-10 in fuel alone with the prices these days just to get there as its not on my way anywhere.
Johndeere3720
Padawan Tractor Learner, Advertiser
- Joined
- Mar 14, 2009
- Messages
- 3,965
- Location
- NW Oregon
- Tractor
- Bobcat T62, MT55, E42R, E10, John Deere 4100
I saw that when I was at harbor freight last week. I dont need any more jumk around, i already have one cheap Voltmeter. 
It was on sale for $2.99 and worth every last penny. :laughing: You get what you pay for unless it is a good day and you get a good product for a good deal.
It was on sale for $2.99 and worth every last penny. :laughing: You get what you pay for unless it is a good day and you get a good product for a good deal.
CurlyDave
Elite Member
I think the guy running the meter is more important then the brand of the meter.
Give a talented guy an HF meter and he will be fine. Give the wrong guy a top of the line Fluke and he still won't know his donkey from his elbow...
Give a talented guy an HF meter and he will be fine. Give the wrong guy a top of the line Fluke and he still won't know his donkey from his elbow...
Johndeere3720
Padawan Tractor Learner, Advertiser
- Joined
- Mar 14, 2009
- Messages
- 3,965
- Location
- NW Oregon
- Tractor
- Bobcat T62, MT55, E42R, E10, John Deere 4100
That is very true.
OP
shawnjvl
Silver Member
Ad was from facebook
YannyMan
Silver Member
Mone won't read anything. Tried it again to get a 12v reading on the wires going to the PTO. Nothing but 0's, no matter the setting or the test wires.
POS for sure, but it's been sitting for years. Maybe it worked at some point, but they sure don't last.
POS for sure, but it's been sitting for years. Maybe it worked at some point, but they sure don't last.
