hi have ford 420 just replaced ram for tilting bucket as it was screwed when i got it now the lifting rams wont lift fully up just about half way was thinking it was air and if it was wats the best way to bleeb it thanks in advance ;/
hi
- Thread starter quie1989
- Start date
- Views: 939
Cbrown9064
Silver Member
I cannot assist with this problem, but to get some help ypu may want to start a new thread with a more descriptive subject than "hi". Just sayin... 
deerseeker001
Super Member
- Joined
- Jul 20, 2011
- Messages
- 5,699
- Location
- Central wisconsin
- Tractor
- International 2500a with Loader
Welcome from Wisconsin
DJ54
Elite Member
- Joined
- Jan 20, 2009
- Messages
- 4,594
- Location
- Carroll, Ohio
- Tractor
- IH Farmall 656 gas/ IH 240 Utility/ 2, Super C Farmalls/ 2, Farmall A's/ Farmall BN/McCormick-Deering OS-6/McCormick-Deering O-4/ '36 Farmall F-12/ 480 Case hoe. '65 Ford 2000 3 cyl., 4 spd. w/3 spd Aux. Trans
Usually, cycling the functions will bleed air from the system. Did the bucket functions work, when at this point..?? If not, believe I'd check the level in the hyd. oil reservoir.
