Hillers
- Thread starter JonE
- Start date
- Views: 1486
Bird
Rest in Peace
"Hilling" attachments are most commonly referred to by my farmer neighbors as "bedders" in my area, which means a two (or more) bottom double buster (wish I had such)./w3tcompact/icons/smile.gif
I don't know what size tractor you have. Big implements are common at the dealers in this area, but Stanton Small Implment, Stanton, TX, makes the small ones.
Bird
I don't know what size tractor you have. Big implements are common at the dealers in this area, but Stanton Small Implment, Stanton, TX, makes the small ones.
Bird
Kevin_mc
Bronze Member
JonE, I'm a small scale garlic grower in East-Central Missouri and still harvest and plant by hand. However I have my eye on the opportunity for growth into some mechanized processes. In the May 2000 "Growing for Market" newsletter there was an ad from Ferrari Tractor CIE. selling a potato harvester which could be used for garlic and other similar bulbs and tuber. The price was $2100 and is a 3ph impliment. You can contact Ferrari Tractor at 530-846-6401 and they are located in Gridley CA.
If you find any planting impliments please let me know.
Kevin
If you find any planting impliments please let me know.
Kevin
Rch
Platinum Member
- Joined
- Apr 6, 2000
- Messages
- 648
- Location
- Central Wisconsin
- Tractor
- 1986 Ford 1910 with 770B (FORD) loader, 4 MFWD; 1986 Bolens G214,back hoe,loader,MFWD (Iseki) 21 hp)
Around Wausau/Marathon/Mosinee/Edgar/Fenimore WI they grow ginseng (good for flat feet,poor sex life and Florida real estate values) and several dealers weld-up special 3 pt. devices for 'hilling'. Buetsch Implement ,2895 County Rd. S/Marathon WI ,715 443 2276 has used ones on the lot. also Gertschen Imp. 609 4th. Marathon WI, 715443 2192; Marathon Equip. 3301 Hwy WW Wausau,WI 715 675 2391 These make 6-8 " mounds about 12" wide with a gully about 10-12 apart
RCH
RCH
Bird, look in your garage and you'll know what size tractor I have. Probably would've been easier to just say B2710 but I like to be evasive./w3tcompact/icons/wink.gif
What if I took 2 mould-boards with opposite angles and positioned them to push the dirt towards each other? Do they make different angle mould-boards?
What if I took 2 mould-boards with opposite angles and positioned them to push the dirt towards each other? Do they make different angle mould-boards?
Bird
Rest in Peace
JonE, I've never seen a "left handed" moldboard, but of course, that doesn't mean they don't exist. In my black clay, a 2710 would have a hard time pulling a two bottom moldboard very deep if it were in ground that has not been previously cultivated, but in ground that has been plowed or tilled, a two bottom double buster, or bedder, would be no problem.
Bird
Bird