Hood prop rod

   / Hood prop rod #1  

wombat

Member
Joined
Aug 13, 2006
Messages
44
And another thing.

My Green ym2000 has a removable rod around 2ft long and 10mm thick clipped to the left hand side chassis rail.

I can only think that it is a prop for the bonnet but I can't work out where it goes.

My tractor has an after market air filter set up with a barrel type filter in front of the radiator top tank. Does the origional flat, round filter case have a socket for this rod to fit in?

Wombat
 
   / Hood prop rod
  • Thread Starter
#2  
C'mon Guys.
Hasn't someone seen this thing?:confused:

It has a rubber cap on one end and a small pin across the other end.

I'll take a pic next week when i'm back out the farm.

Wombat
 
   / Hood prop rod
  • Thread Starter
#3  
This should be it.
tractorphotobucket.jpg
 
   / Hood prop rod #4  
Sorry Wombat,
Not ignoring you, but thats the old style YM2000. Not at all familiar with it. Nice looking tractor though.

Bruce
 
   / Hood prop rod #5  
That's the first time I've seen a hood 'prop rod' on any Yanmar tractor.
 
   / Hood prop rod
  • Thread Starter
#6  
Thanks Guys.:)

She's a great old clunker,loves to work.

The prop could be an add on but it has me perplexed.:confused:
It doesn't seem to fit anywhere, but it looks original.
I might have to make up a bracket to slip it into under the hood.

Wombat
 
   / Hood prop rod #7  
Wombat, what are those front tires? I'm wondering if an automotive tire would gouge less and steer easier than rib front tires.

Comments?


(And that's sure a unique color, isn't it! :D)
 
   / Hood prop rod
  • Thread Starter
#8  
Cali, those are light truck tyres.
They were on it when I got it, rice tyres on the back.

They steer pretty good except in soft, wet soil. Then they push/slide a bit and I have to use the L/R brake to turn tight. Cheap and easy to get though.

The green is a bit hard on the eyes some mornings, probably due to the previous nights activities though.;)

http://
06-0601Tractor.jpg


Wombat
 
   / Hood prop rod
  • Thread Starter
#9  
Bump.
Hi folks.
I have made a bracket for this.
It works well. nomore getting hit on the head for me.:)
You can see prevoius wear on the inside of the hood/bonnet.
 

Attachments

  • hood bracket.jpg
    hood bracket.jpg
    58.5 KB · Views: 202
  • bracket1.jpg
    bracket1.jpg
    22.1 KB · Views: 175
   / Hood prop rod #10  
Looks good Wombat. Now I understand your need for a prop. All the Yannies I had seen have the hood which tilts forward.

Bruce
 

Attachments

  • Yan-front_web.jpg
    Yan-front_web.jpg
    39.2 KB · Views: 165

Tractor & Equipment Auctions

2024 Homemade Enclosed 16ft S/A Cargo Trailer (A51694)
2024 Homemade...
2015 Dodge Journey Van (A51694)
2015 Dodge Journey...
2010 Ford Edge SE SUV (A51694)
2010 Ford Edge SE...
2025 Kivel 48in Forks and Frame Skid Steer Attachment (A51691)
2025 Kivel 48in...
2002 Freightliner FL70 Elgin Street Sweeper Truck (A51692)
2002 Freightliner...
2020 Bobcat T595 Compact Track Loader Skid Steer (A51691)
2020 Bobcat T595...
 
Top