mhalla
Gold Member
<font color="green">tacbat - My 2210 had plenty of power pulling my 48" boxblade to grade the crushed stone on my driveway to eliminate ruts. Except of course when I asked my wife to come out and see what the boxblade could do and I forgot I had the front end loader bucket pointed down into the driveway. It took a couple of times spinning my wheels before I realized it was the bucket on the front keeping me from going forward and not the full load of crushed stone remaining in the box when I had stopped.
The real test of my boxblade and 2210 will be when I change the grade on two sides of my garage to create a swale to promote runoff to move away from and not toward the garage. This will require digging into some clay. I just have to wait until all the rain we have been getting in Indiana comes to an end for a while.
I do wonder how well the 2210 handles larger boxblades and sought this information before I bought mine. Unfortunately when I bought my 2210 there weren't many sold at the time and no one responded with any actual experience to an earlier post of mine when I was trying to figure out what size boxblade to get. Looks like there is more experience out there now with the 2210 and a variety of boxblade sizes.
If anyone has used a 54" boxblade with a 2210 I would like to hear from you as I am sure would the person who started this thread. It's too late to do me any good but might help others with their choice.
Mike</font>
The real test of my boxblade and 2210 will be when I change the grade on two sides of my garage to create a swale to promote runoff to move away from and not toward the garage. This will require digging into some clay. I just have to wait until all the rain we have been getting in Indiana comes to an end for a while.
I do wonder how well the 2210 handles larger boxblades and sought this information before I bought mine. Unfortunately when I bought my 2210 there weren't many sold at the time and no one responded with any actual experience to an earlier post of mine when I was trying to figure out what size boxblade to get. Looks like there is more experience out there now with the 2210 and a variety of boxblade sizes.
If anyone has used a 54" boxblade with a 2210 I would like to hear from you as I am sure would the person who started this thread. It's too late to do me any good but might help others with their choice.
Mike</font>
