How can I use my stabilizer bars with a QH

[Pooh_Bear]

I finally got to use my Harbor Freight quick hitch today.
I had to remove my stabilizer bars.
How can I use my stabilizer bars with my QH.
Thanks.
Early 1949 8N

Pooh Bear

 

[beenthere]

A pic of your situation might help. Some modification of the stabilizers may be needed, but am not sure which bars you are questioning.

 

[Pooh_Bear]

Mine are just the flat steel bars that come from TSC.
Stabilizer Bars from TSC
Quick Hitch from Harbor Freight

Pooh Bear

 

[beenthere]

What are you trying to accomplish with those stabilizer bars?

 

[countrybumpkin]

Yours hooks on to the lift arm pin, correct? If so Just replace the short lift arm pins that cam with the QH with longer ones and you will still be able to attach the sway bar. Depending on which way the bars hook, either on the outside or the inside of the lift arm, just install the pin from the opposite direction so it doesn't have to be removed each time you want to install or remove the sway bar.

 

[Pooh_Bear]

I was hoping that would be all it would take.
When some of the heavier implements flop side
to side it feels like I'm gonna break something.

Thanks.

Pooh Bear