Husqvarna Pole Saw

   / Husqvarna Pole Saw #1  

DIXIEDOG

Platinum Member
Joined
May 10, 2009
Messages
828
Location
Maine
Tractor
International 2544 / Gator 825i/L2501/General
Not exactly a chainsaw but kinda sorta is :laughing:


Well anyway I picked up a pole saw attachment for my Husqvarna 326 ldx and I'm very impressed with it so far, the thing works awesome.:thumbsup: I was most impressed with the adjustable oiler...it's always the little things:D I can easily reach limbs that are 10' up and cut brush/limbs that are down real low to the ground without bending over all day and the 326 has plenty of power to pull the 12" chain :cool:
 
   / Husqvarna Pole Saw #2  
Not exactly a chainsaw but kinda sorta is :laughing:


Well anyway I picked up a pole saw attachment for my Husqvarna 326 ldx and I'm very impressed with it so far, the thing works awesome.:thumbsup: I was most impressed with the adjustable oiler...it's always the little things:D I can easily reach limbs that are 10' up and cut brush/limbs that are down real low to the ground without bending over all day and the 326 has plenty of power to pull the 12" chain :cool:

:thumbsup: That sounds just a little safer than me climbing up in my FEL bucket with my big saw:laughing::confused2::laughing::confused2:
 
   / Husqvarna Pole Saw
  • Thread Starter
#3  
I was using a ladder propped up against the tree....works good but gets a bit dicey when a big limb starts to fall.....I started thinking a pole saw might work better.:laughing:
 
   / Husqvarna Pole Saw #6  
I have the Husqvarna Pole Saw and it is great. :thumbsup: We have a lot of fir trees scattered about our property and the older limbs will slowly bend down and slap me in the face while I'm mowing or out horseback riding.:)
 
   / Husqvarna Pole Saw #7  
I was recently surfing through local craigslist and saw a Cub Cadet pole saw for sale.....I finally did get with the seller and bought it.
It looks great, must be 8 or 9 feet long! Haven't had a chance to use it yet....
What do these things go for new? I paid 140 bucks......
 

Tractor & Equipment Auctions

2016 Nissan Altima Sedan (A50324)
2016 Nissan Altima...
Land Honor Skid Steer Tree Puller (A50515)
Land Honor Skid...
Impact Attenuator Guard Rail (A51692)
Impact Attenuator...
CFG Industrial MX12RX (A50121)
CFG Industrial...
10' Feed Bunk (A50515)
10' Feed Bunk (A50515)
1977 Allis Chalmers 7060 Tractor (A50514)
1977 Allis...
 
Top