LouieJunior
Platinum Member
My brother purchased a used JD 5045 and needs to change the male couplers on his rear hydraulic top link -- Does anyone know what to purchase? A picture is included.
Hydraulic Coupler for 5045
- Thread starter LouieJunior
- Start date
- Views: 1394
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,545
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Pic is of the female .. Are you looking to change the male on the end of an hydraulic hose or this female coupler?
Last edited:
Discount Hydraulic Hose
Silver Member, Advertiser
it's hard to tell which style you have; most have markings on side to determine which style you have.
OP
LouieJunior
Platinum Member
Yes - exactly. Need to purchase male couplers compatible with this tractor.
beenthere
Super Star Member
- Joined
- Aug 16, 2001
- Messages
- 18,545
- Location
- Southern Wisconsin, USA
- Tractor
- JD_4x2_Gator, JD_4300, JD_425, JD_455 AWS, added JD_455, JD_110, JD_X485(sold)
Being in Moline, IL, you are a stones throw from JD headquarters. But a local dealer will have the right male end to connect to the JD model 5045. But may be important to say if it is 5045D or 5045E. Am sure the coupler is quite standard.
Is the top link a Deere product or did it come without male connector hose ends?
Is the top link a Deere product or did it come without male connector hose ends?