I am adding a separate hydraulic cylinder to lift the sleeve hitch on my Case GT. I'd like to use what I have on hand as much as possible to keep the costs down. I am going to mount it so that when the cylinder extends it is going straight up and down to lift the hitch. I have a cylinder that has a 5 inch stroke just like what I want but it only has a 5/8ths rod. Seems a little light to me but I tend to overbuild everything. Realistically all I will ever lift with this sleeve hitch is about 250 lbs max because that is getting to be a lot of weight hanging off of the back end. Would that cylinder work in this application?
Hydraulic cylinder ?'s
- Thread starter dodge85rc
- Start date
- Views: 983
J_J
Super Star Member
- Joined
- Sep 6, 2003
- Messages
- 18,952
- Location
- JACKSONVILLE, FL
- Tractor
- Power-Trac 1445, KUBOTA B-9200HST
It will probably work as long as there is no side load on the cyl shaft.
