Jerome
Silver Member
The hydraulic cylinder on the chute of my snow blower will not move it is acting like it is jammed but I can move the chute by hand along with the control arm. Any ideas????
Thanks
Thanks
Hydraulic cylinder will not move
- Thread starter Jerome
- Start date
- Views: 10981
Soundguy
Old Timer
- Joined
- Mar 11, 2002
- Messages
- 51,575
- Location
- Central florida
- Tractor
- RK 55HC,ym1700, NH7610S, Ford 8N, 2N, NAA, 660, 850 x2, 541, 950, 941D, 951, 2000, 3000, 4000, 4600, 5000, 740, IH 'C' 'H', CUB, John Deere 'B', allis 'G', case VAC
Bypassing internally?
Soundguy
Soundguy
kennyd
Advertiser
Jerome said:
It's called Regen for short!
Read this post, it should explain what is happening:
http://www.tractorbynet.com//forums/showthread.php?t=9403
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
We need more information.Jerome said:
Assuming it worked at one time then
- Is it still connected to the spool valve?
- How do you actually have it connected? Front mount blower, rear mount blower, using loader valve or a remote valve?
- Have you changed the hydraulic connections recently?
- Have you checked the hoses for proper connection? Do you have a good connection?
- Did you try swapping hose connections to another good valve spool?
Assuming it worked at one time then Worked yesterday
* Is it still connected to the spool valve? Yes
* How do you actually have it connected? Front mount blower, rear mount blower, using loader valve or a remote valve? Rear mount TPH remote valve
* Have you changed the hydraulic connections recently? No
* Have you checked the hoses for proper connection? Do you have a good connection? As far as I can tell you can see it trying to move
* Did you try swapping hose connections to another good valve spool? I only have the one valve.
* Is it still connected to the spool valve? Yes
* How do you actually have it connected? Front mount blower, rear mount blower, using loader valve or a remote valve? Rear mount TPH remote valve
* Have you changed the hydraulic connections recently? No
* Have you checked the hoses for proper connection? Do you have a good connection? As far as I can tell you can see it trying to move
* Did you try swapping hose connections to another good valve spool? I only have the one valve.
MadReferee
Elite Member, Rest in Peace
- Joined
- Apr 28, 2003
- Messages
- 3,862
- Location
- New Hampshire
- Tractor
- Kubota B2710, IH TD6-62 dozer with Drott 4n1 bucket loader
Since you can move the cylinder manually in both directions, it probably isn't a connection issue but you should check the connections anyway.
Disconnect the hoses from the QD's (I assume you have QD's). Check to make sure the ball in the QD's can actually move. Reconnect QD's and see if it works.
If it still fails then the problem might lie in the valve itself. If you have another hydraulic attachment then connect it up and see if the cylinder moves. If it doesn't then it's the valve. If it works correctly then you have a cylinder problem.
Disconnect the hoses from the QD's (I assume you have QD's). Check to make sure the ball in the QD's can actually move. Reconnect QD's and see if it works.
If it still fails then the problem might lie in the valve itself. If you have another hydraulic attachment then connect it up and see if the cylinder moves. If it doesn't then it's the valve. If it works correctly then you have a cylinder problem.
