Hydraulic Flow Restrictors

[kennyd]

KBOH / BoltOnHooks LLC has added a few new Hydraulic Flow Restrictors to our lineup. Some are custom made and not available from other sources.

Flow Restrictors are perfect for hydraulic top and side links as well as any other hydraulic cylinder to help slow them down and gain more precise control.

.031" NPT Flow Restrictors - BoltOnHooks LLC

.031 restrictor, .031, restrictor, top link restrictor, side link restrictor, top link, side link, TnT

www.boltonhooks.com

.031" Flow Restrictor, JIC Female to JIC Male - BoltOnHooks LLC

.030 restrictor, .030, restrictor, top link restrictor, side link restrictor, top link, side link, TnT

www.boltonhooks.com

.030" Flow Restrictor, -06 JIC to -06 ORB - BoltOnHooks LLC

.030 restrictor, .030, restrictor, top link restrictor, side link restrictor, top link, side link, TnT

www.boltonhooks.com

.030" Flow Restrictor, -06 BSPP to -06 JIC - BoltOnHooks LLC

.030 restrictor, .030, restrictor, top link restrictor, side link restrictor, top link, side link, TnT, DPOCV, BSPP, check valve

www.boltonhooks.com

 

[tacticalturnip]

TBN just had a good conversation about restrictors not too long ago; if you've got a hydraulic top link, you want a set.

 

[CloverKnollFarms]

Made a world of difference on my top link

 

[kennyd]

We are continuing to add to our line of custom fixed flow restrictors!

We now have some ORB (O-Ring Boss) ones in -06 and -08 sizes, -04's are coming soon.

Also in the works are 3/8" and 1/2" BSPP (British Standard Pipe Parallel).

.031" Flow Restrictor, ORB/SAE Female to ORB/SAE Male - BoltOnHooks LLC

.030 restrictor, .030, restrictor, top link restrictor, side link restrictor, top link, side link, TnT

www.boltonhooks.com

 

[tacticalturnip]

Awesome! Restrictors are a must with a hydraulic top link, and perhaps side links too, but I've never had one of those.

 

[Gordon Gould]

BSPP to JIC

gg

 

[kennyd]

Update 1/7/2025:

We added a new version, BSPP in 3/8" and 1/2" sizes.

I also created a new page dedicated to these since the other page was getting 'busy'.

Hydraulic Flow Restrictors - BoltOnHooks LLC

www.boltonhooks.com

 

[5030]

Kenny... I just use a suitable size (drilled) copper washer inserted in the subject line. Nice thing about a copper washer or an old penny is it's ability to self seal under the pressure afforded by tightening the fitting.