Hydraulic Hose hanger

[koamfps]

Has anyone ever made one? Here's my dilemma - I have a rear remote on my TN70. I use a quick attach snow plow and two of the hydraulics hoses have been ran to the back of the tractor to be used in the rear remote. Problem: I use the rear remote for other equipment and have to leave the hoses hanging. I am looking for a idea on making some kind of hanger to keep the hoses out of the way when they are not in use.
Suggestions.

Just so I'm not asked; Snow plow up/down is ran of the Joy stick. The left and right is run off the rear remote

Thanks

 

[CDN Farm Boy]

So if I'm reading right, the hoses stay in place (run to the FEL) and you just need to find a way to mount the unused male ends at the rear?

If that's the case, how about mounting another pair of female QD's at the back to be able to plug the lines into to both keep them secure and clean when not in use?

 

[koamfps]

Good Iead and will keep the ends clean as well. Any other suggestion/

 

[jinman]

How long are the hoses and what size? Smaller hoses could be looped and hung on your torque tube between the FEL arms. Large hoses have to have special handling because they are stiff and take up lots of room. In my grapple application, I have quick connects mounted on my loader torque tube and disconnect those leaving just the hoses running from the rear to the front QDs clamped to the cross-tube. The hoses stay with the grapple bucket. I think that's the way most FEL remote hydraulics connections are made.