Hydraulic line adapter question

   / Hydraulic line adapter question
  • Thread Starter
#21  
The tractor side/ female rear remote is 1/2, it read pioneer 4250. The male end on the hydraulic line appears to be 1/4 body-0.56 ISO5675. I know my terminolgy is off as I'm new to hydraulics so bear with me.

Sportsman762, I believe that would work if I replaced the lines but I'll just get adapters.

Midniteoyl, I believe I will need 1/4 female to 1/2 male adapter as the male end appears to measure 0.56 from looking at the chart

Ericm979, that makes sense, thank you
 
   / Hydraulic line adapter question
  • Thread Starter
#22  
I went to the shop today and took both lines with me. I talked with the fella and male end was 1/4 body and had the "old" JD end on it with a o-ring. Since the lines were 6' too long as it was, we went ahead and cut them and put new ends on with a adapter to 1/2. Came home and put them back on and everything is peachy. $40 dollars to do it right with both adapters, cut to length and new ends. I appreciate everyone's help and thank you.
 
   / Hydraulic line adapter question #23  
Nice (y)
 

Tractor & Equipment Auctions

2006 FREIGHTLINER COLUMBIA 120 (A55745)
2006 FREIGHTLINER...
TEST YOUR BID BUTTON! (A52706)
TEST YOUR BID...
(2) Goodyear 18.4-38 Tires (A53316)
(2) Goodyear...
2023 Ford F-150 4x4 Ext. Cab Pickup Truck (A55852)
2023 Ford F-150...
14' Bi-Parting Gate (A50120)
14' Bi-Parting...
2016 Ford F250 Pick Up (A47477)
2016 Ford F250...
 
Top