srparrish85
New member
- Joined
- Sep 30, 2008
- Messages
- 2
I have a 2007 New Holland TT75 2wd with 117hrs. The problem I am having is that hydraulics(lift arms) are stuck in the up position. Anyone have any suggestions for getting the to do down?
Hydraulics stuck up
- Thread starter srparrish85
- Start date
- Views: 4281
6sunset6
Veteran Member
- Joined
- May 6, 2007
- Messages
- 1,055
- Location
- SE NY
- Tractor
- NH TC34DA 34HP HST, 2 rear remotes, front diverter, loaded R4's
engine off , wrap a rag around the fitting at the base of the lift cylinder and crack it. slowly. oh wait you mean the three point not the fel. Look under the seat in front. There is a knob. It is probably tight all the way one way. Turn it the other way. It controls the speed of the 3 point going down.
If that does not do it then one of the eagles will have to spaeak up. I have no other clue.
If that does not do it then one of the eagles will have to spaeak up. I have no other clue.
