boatpilot1
Member
Is there an adapter to convert the older style bigger pioneer fittings to the ones that are on compact tractors?
Hydro couplers
- Thread starter boatpilot1
- Start date
- Views: 1260
Leejohn
Elite Member
What are the old style like? Are you sure you just don't have a 1/2' and needing a 3/8"? Thake a look at this http://www.discounthydraulichose.com/v/vspfiles/downloadables/qd_sizechart.pdf
OP
boatpilot1
Member
Maybe. Have to check my couplers. The ones that are on the compact tractor won't fit the style that were on my older bigger tractors. Was wondering if there was an adapter to hook them up to my compact? Thanks for your input.
We eventually just replaced the hose ends on our older equipment to the new pioneer style.
If you have lots of the old type plugs on equipment it may be easier to change the ones on the tractor to match or hydraulic shop could make a short pig tale adapter with the ends you need.
The only adapter I have seen goes from new style male to old style male, to use newer equipment on older tractors, you need the other way around.
If you have lots of the old type plugs on equipment it may be easier to change the ones on the tractor to match or hydraulic shop could make a short pig tale adapter with the ends you need.
The only adapter I have seen goes from new style male to old style male, to use newer equipment on older tractors, you need the other way around.
Sawyer Rob
Super Member
I don't see why you can't make your own adapters... A couple male and female couplers and a couple pipe close niples or what ever you need to get them together...
Thankfully, everything comes with Pioneers today...
SR
Thankfully, everything comes with Pioneers today...
SR