Hyraulic Remotes for Branson 3510h

[Reg]

IReg,

Is there any reason that you can not install a diverter in one of the stabilizer circuits.

NO power to the diverter, the stabilizer circuit works normally. Flip the switch on the diverter valve and the fluid now goes to the thumb using the stabilizer lever for thumb operation.

Thanks for the suggestion,
I probably could, but knowing that there is a 6 stack of valves right in front of my feet..... I suppose I could figure how to tap off of that.

What I think is more likely is that I will replace one of my rear remotes with a detented valve and run the hoe off of that.
They are all 1/2 inch hoses, so I don't think there would be a flow problem.
Once the hoe is on I usually have little need for the rear remotes, so one for the grapple, one for the hoe, one for (maybe) a hoe thumb, would still leave me a free one.
Yep, I think that is the way to go.