Loader I bent it out of shape

   / I bent it out of shape #1  

robert thomas

Member
Joined
Nov 16, 2010
Messages
41
Location
south e missouri
Tractor
05 dk45se
I have a 2005 DK45 with loader, I beleave that the bar on top of the main loader arm is called the self leveling arm .
I bent mine almost 10 inches on the right side my fault .
tried back pulling a stump.:ashamed:
my dealer says that Kioti doesnt use this loader anymore and he cant get parts.
This really sucks,because now the bucket sits lower on the rt side .
Do any of you know where I can find one?
It measures 47 3/4 " with a measuring tape.
I would love any help I can get. ty.:thumbsup:
 
   / I bent it out of shape #2  
Can you get some stock form a steel supplier and make one? Or know of a fabricator that could? I am sure someone out there can help you out. Good Luck!
 
   / I bent it out of shape
  • Thread Starter
#3  
I would love to do it myself but i need to finish getting the area where my shop is gonna go cleared out.:D
this is one of those cart before the horse things:(
 
   / I bent it out of shape #5  
worse case.....get the loader over to a welding shop if you cant do the repairs yourself. its just steel that needs reshaping/replacement.
 
   / I bent it out of shape #6  
worse case.....get the loader over to a welding shop if you cant do the repairs yourself. its just steel that needs reshaping/replacement.


also...NEED PICS
 
   / I bent it out of shape #8  
My neighbors hay shed blew down on top of his tractor this spring, and bent the same are. His was just pinned on, so we took it off, put it on the ground, arch up, and drove the rear of the tires of the pickup on it length wise. It wasn't a perfect straightening job, but it worked good enough for a farm tractor.
 
   / I bent it out of shape #9  
I have a 2005 DK45 with loader, I beleave that the bar on top of the main loader arm is called the self leveling arm .
I bent mine almost 10 inches on the right side my fault .
tried back pulling a stump.:ashamed:
my dealer says that Kioti doesnt use this loader anymore and he cant get parts.
This really sucks,because now the bucket sits lower on the rt side .
Do any of you know where I can find one?
It measures 47 3/4 " with a measuring tape.
I would love any help I can get. ty.:thumbsup:
Robert
Please email me with your email address.
I will see if I can get you taken care of.:thumbsup:
 
   / I bent it out of shape #10  
"I will see if I can get you taken care of."

I see you're still a nice, helpful guy at heart, Rick.

Jon
 

Tractor & Equipment Auctions

2016 Freightliner Sprinter 3500 Mechanics Van (A46683)
2016 Freightliner...
VOLVO EXCAVATOR  EC330CL (A47001)
VOLVO EXCAVATOR...
LIGHTS (A47001)
LIGHTS (A47001)
2014 420F BACKHOE (A47001)
2014 420F BACKHOE...
2025 Swict 60in Bucket Skid Steer Attachment (A46683)
2025 Swict 60in...
2020 Armor Lite SBD-40 LTS Belly Dump Trailer (A45336)
2020 Armor Lite...
 
Top