OK so through some help on this board I have figured out that my LCV is leaking internally. I also need some hard parts for the valve joystick that I can't find so I am thinking about just replacing the entire valve and being done with it. I would like to stay in the $200 range. I found this one LV22RFSTKAB at surpluscenter.com but it doesn't mount flat the way I need it to. If I mounted it flat with the lines coming out the top like I need, then the up and down for the loader would be side to side on the stick. I talked to the tech folks at surpluscenter.com and they said that you can't swap the vavle internals to make what I need and they don't have anyting that would work.
Can someone point me to the vavle I need??
I need a valve that mounts so that all of the lines come out of the top and the up/dn on the stick is up/dn on the loader and then side to side is bucket roll. It is going on a JD 4200 with a woods loader if that matters and it is not a JD valve that is currently on it.
Can someone point me to the vavle I need??
I need a valve that mounts so that all of the lines come out of the top and the up/dn on the stick is up/dn on the loader and then side to side is bucket roll. It is going on a JD 4200 with a woods loader if that matters and it is not a JD valve that is currently on it.
