I Need Plans for a Three Point Single Bottom Plow

[handymansvs]

Hi Everyone,

I want to build a Three Point Attaching Single Bottom Plow with a Coulter to use with my Kubota B8200HST 4WD. I have been able to acquire most of the major components. However what I need is a detailed set of plans that will give the correct measurements and angles. I know it will be nesessary to adapt my components in order to make the plow a functional piece of equipment. Does anyone know of a existing plans that I might acquire.

I appreciate any help you can offer!

Respectfully,
Benjamin J. "Joe" Browning

 

[Grumpy Old Man]

Hi handymansvs , you can buy that plow in craigslist for less than a hundred dollars and save your time for something more important , you can search multiple cities by using searchtempest.com

 

[handymansvs]

Hi,

Thanks for the reply. I already have checked Craigslist and Ebay for a good used Plow to no avail. Anything outside of the States of Washington and Oregon is too costly to ship.

Joe

 

[MIKE R]

Would someone getting you some dementins off of their plow be any help.

 

[bullbreaker]

This site should help some.

Boone


Worksaver Standard Size One Bottom 14" Plow

 

[handymansvs]

Hi Mike,

Yes, that would be a great help. If by chance you have one that you could get the measurements, the best way to record them would be on the exploded schematics plans in the next post that" Member Boone" sent. The Worksaver Single Bottom Plow is exactly the plow I want to build. If you do, you could scan the plans with the measurements and send them to me.

Thanks again for your help, it is appreciated!

Respectfully,
Benjamin J. "Joe" Browning
handyman@iinet.com