I need rain.... as I need to grade the road.

[dangerdoc]

Yup, blade is double swivel. (angle and tilt)

But I set it up with the R-side 3pt arm lower (minor adjustment) so that I can crown the road and also angle to cut nicely, mixing the rock and binder back together as they tend to separate as the road wears.

I was just wondering what you all do... maybe there was a "Dry" way that was better than what I've had luck with in the distant past.

I don't want to water it by hand..... then grade... that is not an option.

I blade to seperate rock from binder. My rock disappears during the wet season. Once it gets good and dry, I blade to restore the berm and bring the rock back to the top. I try to stay out of the binder, the crust, unless I have a pot hole.

 

[FxdGrMind]

Drizzle and light rain yesterday and today.... WOOOT!

I had made some smal fixes over the w/e, but now I should be able to work the whole road and re-grade then pack nicely.

Neighbors were warned and should be happy campers now.