dullpain
Platinum Member
- Joined
- Aug 2, 2000
- Messages
- 511
- Location
- Middle Tennessee
- Tractor
- Kubota M5700 4 WD w/ FEL, Kioti CK4010SE HST, 21' Flatbed Gooseneck Trlr.
I want a Gambrel Roof
- Thread starter holstein05
- Start date
- Views: 5484
CurlyDave
Elite Member
I think these guys can help with a gambrel building Socket Systems
Slamfire
Veteran Member
My Dad and I built two, one for my sister's pony barn, and one for the two car (Mom's and mine) garage.
We used the wall supported method, and while I don't remember all the dimensions (it was more'n 50 years ago) I remember the pitch, 7 to 5 for the lower section and 5 to 7 for the upper. The upper rafters were notched for the supportin' cripple wall, and the lower rafters were notched at both ends.
My danged kid brother tore down the pony barn a couple years ago, the loft was the best deer stand I ever used.
We used the wall supported method, and while I don't remember all the dimensions (it was more'n 50 years ago) I remember the pitch, 7 to 5 for the lower section and 5 to 7 for the upper. The upper rafters were notched for the supportin' cripple wall, and the lower rafters were notched at both ends.
My danged kid brother tore down the pony barn a couple years ago, the loft was the best deer stand I ever used.
86turbodsl
Bronze Member
I just got done building a gambrel barn for my wife's horse. 24 foot wide, I built the roof trusses on the second floor deck. I used the calculator on easy rafters that a previous person posted. Worked great. The whole barn turned out great and the wife is very happy. try easy rafters.
