Info on 2210 Folding ROPS

   / Info on 2210 Folding ROPS #1  

CHUCKG

Bronze Member
Joined
Apr 30, 2003
Messages
59
Location
Chester, Virginia
Tractor
JD-2210
Sorry for putting some of the photos in two different posts. This is my first time posting photos and I got messed up. Anyways, the 2210 folding ROPS measures 78 inches from the ground to the top. When folded it measures 58 inches from the ground to the top. Took me about an hour to do the full install. It is very simple to do and it fits the 2210 like a glove - very well engineered. The black knob you may have noticed near the hinge is an anti-rattle knob. After the ROPS is in the upright position, this knob tightens any slack you may have and prevents the ROPS from rattling.

There is a feature built into the top center bar of the ROPS which you cannot see in the photos. It is a threaded insert that faces the rear of the tractor and it appears to be a bolt receiver for possibly an umbrella to be mounted. Not really sure on that but just guessing.

Chuck
 
   / Info on 2210 Folding ROPS #2  
Nice, are these available from JD dealers?
 
   / Info on 2210 Folding ROPS
  • Thread Starter
#3  
I'm quite certain they are available to JD Dealers but my local dealer did not have them. I bought mine directly from the manufacturer, FEMCO, Inc., and I also notified my local dealer that they are now available.

Chuck
 

Tractor & Equipment Auctions

Toro GreensMaster 1600 Walk-Behind Reel Mower (A53421)
Toro GreensMaster...
(2) 5' TRAILER RAMPS (A57192)
(2) 5' TRAILER...
JOHN DEERE 560M LOT NUMBER 28 (A53084)
JOHN DEERE 560M...
John Deere 4600 (A53317)
John Deere 4600...
2017 Jeep Patriot 4x4 SUV (A53424)
2017 Jeep Patriot...
Service Truck Hydraulic Rear Liftgate (A55787)
Service Truck...
 
Top