Drdan524
New member
Hello all, I am new to the forums. I have a TO-35 which my father purchased about 20 years ago. It was his pride and joy. He used it to build the foundation of his garage which is 24x48. He only paid $500 for it because it needed a new clutch and the previous owner was not interested in doing it. Now it's mine and I have a few questions.
It is a TO-35 with the Continental Z134 engine. It has a loader and backhoe attachment. The loader is the Davis loader but I am not sure what the backhoe attachment is. The plate is very warn. I will have to see if I can get some kind of rubbing off it with a crayon or something. Any ideas of what backhoe attachments were used on these machines? The reason I am asking is because the bucket teeth are worn and the bucket is pretty worn itself. I work for John Deere construction so I have access to a lot of buckets but I would like to know pin size and spacing. Any help is greatly appreciated.
It is a TO-35 with the Continental Z134 engine. It has a loader and backhoe attachment. The loader is the Davis loader but I am not sure what the backhoe attachment is. The plate is very warn. I will have to see if I can get some kind of rubbing off it with a crayon or something. Any ideas of what backhoe attachments were used on these machines? The reason I am asking is because the bucket teeth are worn and the bucket is pretty worn itself. I work for John Deere construction so I have access to a lot of buckets but I would like to know pin size and spacing. Any help is greatly appreciated.
