Oil & Fuel Injector pump timing-1920

   / Injector pump timing-1920 #1  

toddwulf

Silver Member
Joined
Oct 25, 2001
Messages
228
Location
Cameron Park, CA.
Tractor
1998 New Holland 1920
Had the motor rebuilt and now reassembling on this '98 1920. For timing the injector pump, the manual says to use a spill timing method but we can't get it to definitively say how many shims we need. Shims are used stand off the pump from the cam lobes to open and close fuel to each injector at xx degrees BTDC etc...does anyone have any tricks on timing the pump? If we start with midway on the shim packs would that work? We just can't get the fuel to shut off completely during the spill timing procedure laid out in the manual. Any thoughts, tips, suggestions and help appreciated.

Todd in Placerville
 

Tractor & Equipment Auctions

2014 AMERITRAIL, INC. TUGGER TRAILER (A50854)
2014 AMERITRAIL...
1995 CATERPILLAR 621E (A50854)
1995 CATERPILLAR...
https://www.globenewswire.com/news-release/2025/05/08/3077245/0/en/Nerve-Calm-Complaints-Investigated-2025-User-Reviews-Tested-Verified.html
https://www.globene...
Memo 98 Loader with Brackets (A50514)
Memo 98 Loader...
2014 Dodge 5500 4X4 Bucket Truck (A51039)
2014 Dodge 5500...
Takeuchi Skid Steer (A49461)
Takeuchi Skid...
 
Top