Instaling a BHT-1 Moisture Tester

   / Instaling a BHT-1 Moisture Tester #1  

xcsp

Bronze Member
Joined
May 16, 2007
Messages
61
Location
Berlin Center,Ohio
Tractor
New Holland TN-55
I am Instaling a BHT-1 Moisture Tester Baler Mounted on my New Holland 565 It says to mount Locate a fl at spot between 12 to 24 from the rear of the chamber, about
halfway up the side, on the UNCUT SIDE of the chamber
NOTE: Readings from the cut side of the bale will result in greater
variations of readings and overall higher readings.
which side is the un-cut side of the baler ??????
Thanks Greg
 
   / Instaling a BHT-1 Moisture Tester #2  
I would say the side opposite from the feed/pickup since that is the side the cutter is on.
 
   / Instaling a BHT-1 Moisture Tester
  • Thread Starter
#4  
Thanks for the help hopefully get to use it next week if the rain will quit
Greg
 

Tractor & Equipment Auctions

8 Ft Fork Extensions (A50322)
8 Ft Fork...
2004 FORD F-650 SUPER DUTY DUMP TRUCK (A51406)
2004 FORD F-650...
2014 John Deere 8360R MFWD Tractor (A50657)
2014 John Deere...
1990 KENWORTH T800 FUEL AND LUBE TRUCK(INOPERABLE) (A50854)
1990 KENWORTH T800...
2005 Morgan Corporation Flatbed Body (A50854)
2005 Morgan...
1996 NEW HOLLAND 3930 WITH LOADER (A51243)
1996 NEW HOLLAND...
 
Top