Ampa - I will post a pic by the weekend. Finding one would indeed be like finding a needle in a haystack! It is kind of sad that no company kept these little tractors going as they are excellent machines. Massey & White did carry them for a while.
Snow Installed snowblade on ISEKI G-174 4x4 3 cyl. diesel Update
- Thread starter ampa
- Start date
- Views: 5063
OP
ampa
Gold Member
- Joined
- Feb 9, 2009
- Messages
- 450
I must tell all you guys that I had a big problem when I first started up my tractor....seems the new 2 spool valve had a factory flaw.... bein' a small almost invisable hairline crack on the top the side near the edge of the casting...more noticable under pressure.
I now have an nice oily mess all over everything to clean up.. must admit though... at least the cylinders did move okay until the system lost all hydraulic pressure...the 3 pt hydraulics still seemed to work okay as well when I tested it.... I'll be returning this bad 2 spool valve tomorrow morning for sure.....I have this info posted as well on the hydraulic section of TBN.....take care....Ampa <>
I now have an nice oily mess all over everything to clean up.. must admit though... at least the cylinders did move okay until the system lost all hydraulic pressure...the 3 pt hydraulics still seemed to work okay as well when I tested it.... I'll be returning this bad 2 spool valve tomorrow morning for sure.....I have this info posted as well on the hydraulic section of TBN.....take care....Ampa <>
Last edited:
Ampa - I know where you may be able to buy a complete hydro kit. A friend of mine had one of these tractors with the plow and sold the tractor without the plow. I am pretty sure he left the hydro kit on and the party that bought the tractor does not use it.
If you are interested, let me know and I will talk to him.
If you are interested, let me know and I will talk to him.
amanda11270
Silver Member
I would be extremely interested in the add on hydraulics kit, I am in the process of doing this exact same thing.
OP
ampa
Gold Member
- Joined
- Feb 9, 2009
- Messages
- 450
Yes find out if he wants to part with it....but one problem.... he would need the original part that I have on mine or it would not be possible for him to remove his till I sent him the cover from mine.. this would be time consuming..... waiting for me to ship my part to him and him to ship his part to me
....anyhow you can ask it won't hurt....find out how much he would want for it....the shipping won't be too much as it's a small part..remember though I'm in Canada...Thanks ever so much..... take care Ampa <>
....anyhow you can ask it won't hurt....find out how much he would want for it....the shipping won't be too much as it's a small part..remember though I'm in Canada...Thanks ever so much..... take care Ampa <>Ampa I am thinking he would only sell it with the entire hydro kit. All of his other stuff would be useless otherwise. There are lines, valves, hoses, a bracket that bolts to the fender that holds all of this stuff etc. Seriously doubt he would sell just the manifold. Still interested?
OP
ampa
Gold Member
- Joined
- Feb 9, 2009
- Messages
- 450
I just finised buyin' all new hoses etc. I think the shipping would add a few extra bucks.....there was someone else interested....did he mention a ball park figure ?....if I didn't just spend every dollar I had....this would have been my best route to follow....I really appreciate your thoughtfullness.... take care Ampa <>
