Iseki 3 cyl. Water Pump Question.

   / Iseki 3 cyl. Water Pump Question. #1  

yomax4

Elite Member
Joined
Mar 11, 2007
Messages
2,849
Location
Midwest
Tractor
ISEKI TA 247. Stihl Saws Gravely Zt's Polaris ATV's State Of The Art Welding Equipment
Greetings Guru's. I was attempting a Frost Plug heater today on my TA247 and noticed that my fan had about 3/16 " play in it. Even with the belt tight I could wiggle the fan about 3/16". It seems like a bad bearing but wouldnt you think it would leak water? Any Ideas?

Thanks.
MM.
 
   / Iseki 3 cyl. Water Pump Question. #2  
I just replaced the pump on my TA207. It was the exact same way. It would wobble like it was about to fall off. It never leaked a drop as far as I could tell. I could see a new radiator if I hadn't caught it when I did.
 
   / Iseki 3 cyl. Water Pump Question.
  • Thread Starter
#3  
Thanks for the reply.. I actually noticed mine 10 months ago but wanted to clear it up prior to the Long Cold Minnesota Winter. Did you replace the Bearing or the whole pump?? ( Worried about Radiator too )

Thanks.
MM
 
   / Iseki 3 cyl. Water Pump Question. #4  
I replaced the whole pump. I found one on Ebay. Got it quick.
 

Tractor & Equipment Auctions

48in Ditch Witch Harley Rake Mini Skid (A56436)
48in Ditch Witch...
UNUSED CFG INDUSTRIAL H15R EXCAVATOR (A58375)
UNUSED CFG...
Misc Pallet of Toolbox, Welding Parts, and Torch Carrier (A57454)
Misc Pallet of...
500 BBL FRAC TANK (A58214)
500 BBL FRAC TANK...
NEW HOLLAND TN60A TRACTOR (A58375)
NEW HOLLAND TN60A...
2004 VE ENTERPRISES 500BBL FRAC TANK (A58214)
2004 VE...
 
Top