Iseki TL2700 with 3AG1 engine

[oinkerfarmer]

I finally found the casting number for my engine. It says 3AG1, which I couldn't find anything relating to Iseki. I just did a search on 3AG1 and Isuzu listed a 3AG1 engine as a 3 cyl 21hp. Is this what I've actually got? The rocker cover says Iseki and it looks like an E series engine, but I can't find an E3AG1. Is this possibly and Isuzu manufactured for Iseki E series engine. Anybody out there have a clue?

 

[willty]

my tl 1900 is an isuzu-3af1..

 

[Surge]

Yes, believe so........

My Iseki TA210 LandLeader has a E3AG1 engine as well... you are correct, made by Isuzu for Iseki. Very good engine used for a number of years... 21 HP at the PTO.

 

[case685]

My TL2100 has a 3AE1 engine made by Isuzu. It is 1296cc and rated at 21 pto hp. The cc's should be stamped or cast into the block of your engine. If your tractor is JDM it should be 27 pto hp. Gerry

 

[LINCM]

Yes, believe so........

My Iseki TA210 LandLeader has a E3AG1 engine as well... you are correct, made by Isuzu for Iseki. Very good engine used for a number of years... 21 HP at the PTO.

Hi, I'm looking for a head gasket set or an overhaul kit for my Iseki TA210 Lleader. Would you have any suggestions or leads on where I might find either of those?

 

[lens12]

email me. I can probably supply the parts.