3-Point Hitch iseki tractor hydraulic. Thank You

[noseybailey]

I just wanted to give a GREAT big thank you to this forum. I am very NEW to the tractors and after researching on here I was able to figure out why my Iseki 3 pt would not go down. :cool2:
Patience, Internet and tractor by net / iseki saved the day.

 

[NHmitch]

Thats great to hear! This forum has saved me on multiple occasions! Do you have any photos of your TS2205? Welcome to the forum! There are quite a few TS owners on here, so you should have a good source of information at your finger tips.

 

[reb1851]

I hope you're still there. I have an Iseki TS2205 and like you the 3 pt won't go down. Have not found any info on possible causes or solutions. I sure would like to hear how you fixed yours. Has anyone out there have an illustrated parts breakdown (IPB) for the hydraulic switching or control unit? Without an IPB I don't even know what to call it.

 

[bbrinkley]

I have a TS-2210 and have the owners manual to it, I assume the 2205 won't be much different, email me at gotsand480@aol.com and I will email it too you if you want it. If it won't go down it sounds like the release valve is shut, they have a screw valve near the control that stops it and controls the speed in which it goes down, sounds to me like its too tight.

Brian

 

[yomax4]

I have an Iseki TA 247 with the draft control box next to the seat with a bunch of switches and knobs. Some of them control the draft, others control how high the 3pt goes up or down and others control how fast. I also have a button on the dash to raise and lower the 3 pt as well as the slide up down lever. Half of the time my 3pt goes up and down as it's supposed to and half the time it will go up but not down. Let it set and it works it's way down. Mine can not be the valve because some times it's fine all day and then wont go down for half the next day. I think it's haunted.. Want to buy it. lol...