I have an early Iseki TS1910, serial number 000020?. I have ag tires, I would like to get some wheels and tires better suited to lawn care, and keep the current tires and wheels. I have searched, not many advertisements reference actual pattern dimentions. Wheel makers that I have contacted are yet to respond. Currently tires are 4.00x12 front, and brand new 9x24 rear.
The rear wheel bolt & pilot pattern does not appear to be "standard" to small tractors. Front wheels may be more common. I would like to find wheels (probably 16"), and then worry about tires to match. If Kubota, Yanmar, or others would fit, then I will have more sources to look for. Can anybody confirm the following bolt patterns as being from another tractor maker or source? I can't find truck tires that match this pattern, either.
Is the following wheel pattern common with the Iseki TS1610 or other Iseki tractors? Thanks.
Rear:
Front:
The rear wheel bolt & pilot pattern does not appear to be "standard" to small tractors. Front wheels may be more common. I would like to find wheels (probably 16"), and then worry about tires to match. If Kubota, Yanmar, or others would fit, then I will have more sources to look for. Can anybody confirm the following bolt patterns as being from another tractor maker or source? I can't find truck tires that match this pattern, either.
Is the following wheel pattern common with the Iseki TS1610 or other Iseki tractors? Thanks.
Rear:
- 5.25" pilot hole
- 6 lug, 6.5" hole center to opposing hole center (...holes form 6.5" diameter circle...)
Front:
- 90mm (3.54") pilot hole
- 4 lug, 130mm (5 1/8") hole center to opposing hole center
