spruce Deere
Veteran Member
- Joined
- Feb 1, 2009
- Messages
- 1,168
- Location
- Northmost Idaho
- Tractor
- John Deere 790 with loader LS xr3140h also with loader plus a cab
We were finally able to purchase a AJ401 jacto 3pt cannon sprayer after years of not having our own, having to loan a ag-tec blast sprayer from a partner tree grower... Worked out for both of us, I got it ready to go in the spring because I need to spray earlier than they did. When I was done spraying with it, they new it was ready to go. I then maintained and repaired it threw out the grow season for both of us. Only hang-up was when we both needed to spray at the same time....
I got it mounted on the 790, got the drive shaft trimmed to the right length. Next is to get the electric on/off valve plumbed and wired in.
I am horrible with take'n pics, but the sprayer is easy to find if ya google jacto cannon sprayer for those who are curious of such a beast. All it is a sprayer that blows your chemicals 40ish feet from about an 8 inch cannon shoot. The cannon shoot can be adjusted to blast from any position to almost right at the ground to purnt near straight up, to the left or right.
I got it mounted on the 790, got the drive shaft trimmed to the right length. Next is to get the electric on/off valve plumbed and wired in.
I am horrible with take'n pics, but the sprayer is easy to find if ya google jacto cannon sprayer for those who are curious of such a beast. All it is a sprayer that blows your chemicals 40ish feet from about an 8 inch cannon shoot. The cannon shoot can be adjusted to blast from any position to almost right at the ground to purnt near straight up, to the left or right.
