MattG
New member
I installed the Power Beyond (LVB25603) and 3rd SCV (LVB25927) kits on my 2720. I didn't order the rear female couplers with the 3rd SCV. Has anyone installed the JD rear couplers? After researching the parts, I was only able to come up with a drawing for the 61H1068 adapter fitting. I am guessing that this adapter fitting replaces the the PB hose and is used to attach one of the female couplers. I have attached the drawing of the adapter. If this is the case, then I will have a female connector sticking out about 4 to 5 inches from the mounting bracket just waiting to get knocked off. You all know how stuff happens.
Does anyone have access to JD DTAC's? There is one associated with the rear outlets and 3rd SCV.
This is from the JD build your own for the 3rd SCV kit:
Requires LVB25603 Power Beyond Kit. If two female couplers
on the rear are desired the following parts are required;
two (LVA13231) 1/2 couplers, two (R26375) o-rings, an
(61H1068) adaptor fitting. For more information, refer to
the 2000 TWENTY Series Tractors hydraulic section of the sales manual and DTAC case #83678.
Thanks,
Matt
Does anyone have access to JD DTAC's? There is one associated with the rear outlets and 3rd SCV.
This is from the JD build your own for the 3rd SCV kit:
Requires LVB25603 Power Beyond Kit. If two female couplers
on the rear are desired the following parts are required;
two (LVA13231) 1/2 couplers, two (R26375) o-rings, an
(61H1068) adaptor fitting. For more information, refer to
the 2000 TWENTY Series Tractors hydraulic section of the sales manual and DTAC case #83678.
Thanks,
Matt
