rrpratt
New member
The fuel guage stays at empty. I do measure resistance across the connectors of the sensing unit. Also have about 4 volts DC to it. Guage never moves. Sound familiar to anyone?
JD 5103 fuel guage
- Thread starter rrpratt
- Start date
- Views: 6148
-
- Tags
- john deere 5103
If you take both wires off the sensor and put them together. With the tractor NOT started and the key in the run position does the fuel gauge go to full? If the gauge does not go to full, then problem is in the cluster or the wiring to the cluster.
joecdeere
Veteran Member
- Joined
- Apr 13, 2002
- Messages
- 1,714
- Location
- Cumming,Georgia
- Tractor
- 1948 Allis UC Hi-Crop Cane 1941 Allis WC 1948 Allis G with loader, 1948 Allis G with dual disc 1948 Allis G 1948 Allis G 1949 Allis G 1954 Allis G 1959 Ferguson TO-35 1972 MF 135 1979 Power King 2418 1989 Ford 345C TLB
check your private
messages
messages
Creekpaddler
Bronze Member
I have the same problem with the fuel guage on my 5225. It used to read empty when about 3/4 full. Starting yesterday, the tank is full and the guage still reads empty. I'll try JD5210's suggestion.
