pantherman69
New member
I have a Mahindra 2216. Will a JD 7 backhoe fit it ?
Backhoe JD 7 Backhoe
- Thread starter pantherman69
- Start date
- Views: 847
Egon
Epic Contributor
After he frame mount is modified it should.
Dutch445
Elite Member
with a torch and welder anything can be made to fit!
welcome to TBN!
7 backhoes were installed on tractors like the JD 755, up thu the 790, and 3005. initialli I would think it
would be a little too big for the 2216 mahindra, but according to tractordata.com your 2216 is a tad
heavier than a JD 755 so you may be ok. most important would be your mounting system, as some tractors
aren't very happy with backhoes and require subframes to tie into the front half of the tractor or really tie
strongly onto the rear axles
welcome to TBN!
7 backhoes were installed on tractors like the JD 755, up thu the 790, and 3005. initialli I would think it
would be a little too big for the 2216 mahindra, but according to tractordata.com your 2216 is a tad
heavier than a JD 755 so you may be ok. most important would be your mounting system, as some tractors
aren't very happy with backhoes and require subframes to tie into the front half of the tractor or really tie
strongly onto the rear axles
